CAN-CBX-CPU5201

Powerful Realtime Controller in a Smart Format

  • Power PC™ MPC5121 with FPU, 400 MHz
  • 0.5 GB SDRAM, 1 GB NAND-Flash
  • EtherCAT Master

The CAN-CBX-CPU5201 is a stand-alone CPU module with a powerful 400 MHz PowerPC, 0.5 GB DDR2-SDRAM, 1GB NAND-Flash and RTC with battery backup on-board. The power supply and the CAN bus signals can be applied via the InRailBus connector (TBUS-connector) integrated in the mounting rail or separately via the clamp-connection. From the InRailBus individual modules can be removed without interrupting the bus signals. The CAN-CBX-CPU5201 comes with a 100BASE-TX ETHERNET interface that is accessible via an RJ45 plug in the front. An USB device (e.g. printer, memory stick) can be connected on the front side USB 2.0 Host interface running with full-speed. The two CAN interfaces are designed according to ISO11898-2 high-speed layer and support bit rates up to 1 Mbit/s. One CAN interface is electrically isolated and is accessible via a 5-pole Combicon-style connector. The other CAN interface (optional electrically isolated) is connected to the InRailBus for local CBX-I/O expansion. A serial RS-232 interface for terminal and debugging is accessible via an RJ12 connector. Linux or QNX 6.0 are available as operating systems, others on request. With the IEC61131-3 programming and run-time system CoDeSys the controller can act as a PLC optionally.

 

CAN-CBX-CPU5201

公司

esd electronics

esd electronics gmbh

Further Information